Tissue Embedding System
It is independent design, can put the position left-to-right or right-to-left, to meet different habits of customers.
Feature :
The Embedding center is composed of two modules, main console and Cryo Console. It is independent design, can put the position left-to-right or right-to-left, to meet different habits of customers. The large working surface allows user processing many samples at the same time. The temperature and work start time can be settable through the control panel.
1. The machine adopts fully automatic program control, and can preset an automatic start time of 7 days.
2. The wax bath adopts overheating protection, safe and reliable, filtering design, effectively avoiding paraffin blockage, large capacity, and can meet the embedding of 250 tissues at a time.
3. With sensitive micro switch and foot switch for operator to choose.
4. It has a unique design of the embedded upper-level lighting system, with enough brightness to determine the position of the small tissue package.
5. This machine has 5 independent temperature control systems, among which the temperature control of wax tank, wax nozzle, workbench, storage tank and tweezers block can be adjusted arbitrarily within the range of 0~99ºC.
6. With automatic power-on function, different power-on time can be set every day.
7. Paraffin recovery design, high performance solenoid valve control.
8. It adopts split design, embedding machine and cold table can be combined at will.
Cryo Console:
1. It is composed of a compressor cooled work surface held to chill the paraffin blocks rapidly.
2. The coated surface allows a minimum ice formation and easy cleaning.
3. Temperature is adjustable from room temperature~-20ºC
4. It can be used as a stand alone unit near the microtome station.
Working Area
Innovative design and functionality for flexible working methods
The heated working surfaces are thermally insulated towards the operator and ergonomically shaped. Spacious, heated working area with a non-glare white LED illumination with adjustable intensity.
Adjustable paraffin dispenser paddle to accommodate Mega and Super Megacassettes. Built-in wax trimmer. Urgent biopsies can be embedded at any time even in "standby mode".
Control Panel
Versatile configuration for enhanced user-friendliness
Clear, user-friendly keyboard for easy programming and setup of working parameters. An energy-saving function is incorporated,
using an automatic timer that turns on/off via calculations based on the individual pre-heating times.
Storage and Reservoir
Ergonomics and functionality for better processing
storage-reservoir Two storages of large capacity, independently heated, for molds and cassettes. The paraffin reservoir has a capacity of 5 liters to ensure continuous operation during high workflow. Surplus paraffin is guided into waste drawers, easily accessible from the front side, which can easily be emptied.
Product Parameters
Main Technical Data:
Main Console:
- Nominal supply voltage: 220V/50HZ or 110V/60HZ
- Maximum power draw: 600-800W
- Working temperature: From ambient to 99ºC
- Increments: 1centigrade
- Capacity: Paraffin reservoir: 3.2L
Cassetes/molds tray: 1.4L
6.Dimensions: (W*D*H) 560*530*350mm
7.Weight: 30kg
Cryo Console:
- Nominal supply voltage: 220V/50HZor110V/60HZ
- Maximum power draw: 110VA
- Working temperature: From ambient to -20 centigrade
- Increments 1 centigrade
- Dimensions: (W*D*H) 345mm * 600mm * 375mm
- Weight: 24kg
Accessories:
Standard Setting List
1. Foot Switch 1 pc
2. Fuse (5 A) 2 pcs
3. Power line 2 line
Optional Accessories
1. Temperature sensor
Package Info:
- Each instrument packed Wooden Case
- Dimensions for Main console: 650*600*570 mm
- Dimensions for Cryo console: 650*440*570 mm
- Gross Weight for main console : 42 kg
- Gross Weight for Cryo console : 35kg
The production of the Automatic Pathological Tissue Microtome machine machine introduce
1.Start by the blanking process for the metal part
Normally the house of the Slide Stainer medical was made by the steel or stainless steel of type as 316
The part was beginning as the blanking
1.Laser blanking machine capacity :8000*2000*10mm
2.We had about 15 pcs of the laser cutting machine in blanking workshop ,name from No1 to No 15,
3.6S fully carry out in our workshop according to the iso13485,
4.All of the raw material can be Traceability
2.Bending process for Laboratory equipment Tissue Microtome machine by the press break bending machine
The press brake machine is a powerhouse in the metal fabrication industry, providing an efficient and successful method to bend sheet metal into different forms
To form the metal part into the shape we need ,the first part was by the bending press and the bending die
Stainless Steel :Provides great strength and resistance to corrosion, but its greater spring back the ability to revert to its original shape after bending means that it must be handled carefully.
3.Progressive die metal stamping workshop for Slide Stainer
Automatic Slide Stainer need the bracket for the motor and metal stamping part for the housing and electric connect part,The progressive die stamping can give out the huge volume and low cost for the Surgical Instruments Automatic Slide Stainer Stainless Steel Automatic Slide Stainer Machine Lab Equipment machine spare metal part.
4.Welding workshop for the
Tissue Microtome machine
The Medical Sterilization machine need a lot of welding ,to imporve the capacity and welding quality we introduce the welding robot machine instead of labor human welding
1.QTY of the welding robot :23pcs
2.Capacity of the welding robot :500A
3.Work station:2000*1500mm
5.Plastic injection workshop for the Benchtop Steam Automatic Slide Stainer machine
Plastic part was one part of the Horizontal Universal Laboratory equipment Microtome machine
We had about 10 sets of the plastic injection work for the Laboratory equipment Microtome machine
1.The capacity for plastic injection machine was :1000*850*750mm
2.The max ton for plastic injection machine was 1000T
6.The spare part Warehouse for the benchtop Stainless Steel Multifunction Steam Sterilization machine
The 6S was fully carry out in our warehouse with the ERP system
1.We need to know how many part in our warehouse
2.We need to anticipate the part when to full fill in for all the Automatic Slide Stainer with Laboratory equipment Microtome machine
7.CNC machining for the benchtop Microtome machine
The rotor was the key part for the Universal Digital Thermostatic Ultrasonic Automatic Rotary Microtome ,to make it perfect especial for the Universal Digital Ultrasonic Automatic Rotary Microtome Equipment ,we need to control the tolerance of the rotor very tight,that was why we introduce the High Temperature Automatic Rotary Microtome
1.CNC QTY:15PCS
2.Tolerance for CNC machine :0.01mm
8.Universal Digital Ultrasonic Semi Automatic Microtome stamping ,welding ,rolling Production process on site,the container of the Ultrasonic Semi Automatic Microtome Machine need the vacuum and seal can bear though high pressure
9.Electric part assemble to the Multifunction Steam Sterilization Machine
workshop,the plc or the other computer control part connect to the machine before move to the next production procss.
10.Test workshop for the
Multifunction Steam Sterilization Machine
All Multifunction Steam Sterilization Machine need to be test before transfer it to the warehouse.
Customer visit
Customer review our Fully Automated Tissue Steiner workshop,We were welcome all of our customer to visit our company to review and test the Fully Automated Tissue Steiner for Organisms, Medical, Chemistry,Our business vision was :long term business ,win-win for the future
Packing and loading
The over sea customer always concern about the packing and loading for the Fully Automated Tissue Steiner Machine,we cant bear the lost for tiny mistake for the Vacuum Steam Machine machine ,one mistake will cause the machine broken or cant work .
From the packing for Laboratory Medical Sterilization Machine to the container loading detail show as below
Warehouse and stroage for the medical Medical Sterilization Machine,the temperature should be control within 18-25° for all equipment and test machine ,all the record can trace within 3 years.
After market service
The maintain and repair guarantee for the Medical Sterilization Machine workshop was the key to the business ,when a customer bought a machine from us ,the guarantee was the most importance things customer concern.we sent out technical service team to oversea customer site for the maintain and repair for our customer .Our service for the lab equipment was not stop after the Vacuum Steam Machine Machine sold ,it was the start for our company and your company for win win situation .You use the Vacuum Steam Machine Machine we take care of the rest.
Exhibition
We take part into the MedtecChina Canton Fair (The China Import and Export Fair) exhibition every year ,hope one day we can meet each on the fair
Our vision
The supplier and the customer was togeher for the future ,both parties should be in win-win situation ,so we were looking forwarder to hold hand by hand for bright future.
){kind=link}