Product Description
Rechargeable Automatic Audible and Visual Alarm Veterinary In-fusion Pump, Portable Fluid Administration Pump Machine with LCD Display, KVO, Alarm, Calibration
- HD LCD Display 128x64 HD LCD Display, high capacity words, friendly user interface, dynamically display working status.
- Function This pump has muti-function of audible and visual alarm, KVO, automatically record the settings, preset volume. It is rechargeable, so it is very convenient to take anywhere.
- Compatible with any brand of in-fusion sets after correct calibration; Internal Battery.
- Specification Preset Solution Volume to greatly reduce the workload of nurses; Work mode: ml/h and drop/min can switch freely; Three levels of occlusion: high, middle and low;
- Work Mode Automatically record the settings of last in-fusion can be available per customers request; automatically opens as in-fusion is completed.
1.Install
Fix the device on the infusion stand
2.Power Connect
Connect the AC power ,make sure the power cord is fully plugged into the AC inlet
3.Switch on
Open the IV set Package, connect it to the in-fusion bottle
4.Parameter Setting
Press and hold on the PAGE DOWN key for 3 seconds to enter the Setting interface, shift to IV set setting by SELECT Key, press UP or Down to select the IV set brand.
When a new brand or new specification of IV Set is intended to be used. It must perform a correct calibration before using.
5.Modes setting
Press and hold on the PAGE DOWN key for 3 seconds to enter the Setting interface to Modes setting by SELECT Key, press UP or Down to select the proper mode.
There are ml/h and drop/min for choice.
6.Drug setting
Press and hold on the PAGE DOWN key for 3 seconds to enter the Setting interface ,enter drug library by pressing the SHIFT key , then select a proper category and drug name
7.Stop working
Press the stop button to stop in-fusion and then disconnect pump from patient,open the door and uninstall the infusion IV set, close the door and turn off the pump by pressing "on/off" switch ,unplug the AC power.
The production of the Heating Mantle with Magnetic Stirrer introduce
1.Start by the blanking process for the metal part
Normally the house of the Heating Mantle with Magnetic Stirrer was made by the steel or stainless steel of type as 316
The part was beginning as the blanking
1.Laser blanking machine capacity :8000*2000*10mm
2.We had about 15 pcs of the laser cutting machine in blanking workshop ,name from No1 to No 15,
3.6S fully carry out in our workshop according to the iso13485,
4.All of the raw material can be Traceability
2.Bending process for Heating Mantle with Magnetic Stirrer by the press break bending machine
The press brake machine is a powerhouse in the metal fabrication industry, providing an efficient and successful method to bend sheet metal into different forms
To form the metal part into the shape we need ,the first part was by the bending press and the bending die
Stainless Steel :Provides great strength and resistance to corrosion, but its greater spring back the ability to revert to its original shape after bending means that it must be handled carefully.
3.Progressive die metal stamping workshop for Heating Mantle with Magnetic Stirrer part.
Overhead Laboratory Homogenizers Hot Plate Max 716°F, 100-2000RPM Hot Plate with Overhead Rotor stator Homogenizers , 2000mL Rotor stator Homogenizers
need the bracket for the motor and metal stamping part for the housing and electric connect part,The progressive die stamping can give out the huge volume and low cost for the LED Digital Hotplate Overhead Rotor stator Homogenizers Hot Plate with Ceramic Coated Lab Hotplate, 280ºC Stir Plate, Overhead Mixer 3,000mL Stirring Capacity, 200-1500rpm, Stirring Bar Heating Mantle with Magnetic Stirrer spare metal part.
4.Welding workshop for the
Heating Mantle with Magnetic Stirrer
The Heating Mantle with Magnetic Stirrer need a lot of welding ,to imporve the capacity and welding quality we introduce the welding robot machine instead of labor human welding
1.QTY of the welding robot :23pcs
2.Capacity of the welding robot :500A
3.Work station:2000*1500mm
5.Plastic injection workshop for the
Heating Mantle with Magnetic Stirrer
Plastic part was one part of the Heating Mantle with Magnetic Stirrer
We had about 10 sets of the plastic injection work for the Heating Mantle with Magnetic Stirrer.
1.The capacity for plastic injection machine was :1000*850*750mm
2.The max ton for plastic injection machine was 1000T
6.The spare part Heating Mantle with Magnetic Stirrer
The 6S was fully carry out in our warehouse with the ERP system
1.We need to know how many part in our warehouse
2.We need to anticipate the part when to full fill in for all the bench top Heating Mantle with Magnetic Stirrer with Drying Function Water Storage Tank
7.CNC machining for the bench top Heating Mantle with Magnetic Stirrer.
The rotor was the key part for the Heating Mantle with Magnetic Stirrer Equipment ,to make it perfect especial for the high speedHot Plate Rotor stator Homogenizers with Time Setting Speed Adjusting Rotor stator Homogenizers Mixer Machine Equipment ,we need to control the tolerance of the rotor very tight,that was why we introduce the Heating Mantle with Magnetic Stirrer Equipment
1.CNC QTY:15PCS
2.Tolerance for CNC machine :0.01mm
8.Heating Mantle with Magnetic Stirrer stamping ,welding ,rolling Production process on site,the container of the Medical Sterilization Lab Equipment Vacuum Steam Heating Mantle with Magnetic Stirrer need the vacuum and seal can bear though high pressure
9.Electric part assemble to the
Heating Mantle with Magnetic Stirrer workshop,the plc or the other computer control part connect to the machine before move to the next production procss.
Customer visit
Customer review our Laboratory Digital Ultrasonic Cleaning Baths Machine workshop,We were welcome all of our customer to visit our company to review and test the Digital Ultrasonic Cleaning Baths Machine for Organisms, Medical, Chemistry,Our business vision was :long term business ,win-win for the future
Packing and loading
The over sea customer always concern about the packing and loading for theDigital Ultrasonic Cleaning Baths Machine,we cant bear the lost for tiny mistake for the High temperature Capacity pressure water cleaning Laboratory Glassware Washer and Dryer ,one mistake will cause the machine broken or cant work .
From the packing for Laboratory Medical Sterilization Machine to the container loading detail show as below
Warehouse and stroage for the medical Medical Sterilization Machine,the temperature should be control within 18-25° for all equipment and test machine ,all the record can trace within 3 years.
After market service
The maintain and repair guarantee for the Medical Sterilization Machine workshop was the key to the business ,when a customer bought a machine from us ,the guarantee was the most importance things customer concern.we sent out technical service team to oversea customer site for the maintain and repair for our customer .Our service for the lab equipment was not stop after theHigh temperature Capacity pressure water cleaning Laboratory Glassware Washer and Dryer sold ,it was the start for our company and your company for win win situation .You use the High temperature Capacity pressure water cleaning Laboratory Glassware Washer and Dryer we take care of the rest.
Exhibition
We take part into the MedtecChina Canton Fair (The China Import and Export Fair) exhibition every year ,hope one day we can meet each on the fair
Our vision
The supplier and the customer was togeher for the future ,both parties should be in win-win situation ,so we were looking forwarder to hold hand by hand for bright future.
){kind=link}