Lab Incubator Shaker Temperature and Time Control Circumferential Rotation

Product Description

Product Description

• [PRECISE CONTROL]:This Incubator shaker uses microcomputer and PID cutting-edge technology to control temperature and oscillation frequency, with timing function, which meets the requirement of accurate experiment.
• [SWEET DESIGN]: Adjustable circulating fan speed and temperature setting, with independent limit temperature alarm system, clear obstacles you may encounter during the experiment.
• [IMPORTANT PARAMETERS]: Speed range 50-300rpm; temperature setting range 5-60ºC(41~140 °F); timing range 1min -99h59min; amplitude 20mm (Circumferential rotation).

• High-quality 304 stainless steel Laboratory biological co2 incubator machine.With high capacity chamber for long-lasting durability, the compact design ensures efficient use of space.
• Featuring double temperature and double pressure settings at 121ºC/0.12Mpa and 134ºC/0.22Mpa, this 1000W high-power machine delivers top-notch efficiency. Plus, the intelligent chip temperature control ensures smart operation.
• Prioritizing your safety, our Laboratory biological co2 incubator machine automatically cuts off the power supply in case of internal temperature overheating. The safety valve adjusts the internal pressure, and if it exceeds the standard value, it will automatically vent.
• The steam equipment has the function of pressure adjustment: adjust the inter pressure, if over standard value automatic vent. The autoclave machine has the function of avoild overheat protect device: when inter temperature overheat, power break electric current automatically.

 

 

Product Parameters

Technical Specification Adjustable temperature, speed and timing
Speed range: 50-300 rpm
Timing range: 1min -99h59min
Temperature setting range : 5-60ºC(41~140 °F)
Amplitude: 20mm

 

Temperature Range	RT+5~50ºC				4~50ºC (Rmbient temp-20ºC)
Display Resolution	0.1ºC
Temperature Stability	HIGH±0.5ºC LOW±1.0ºC
Shaking Speed Range	40~300r/min
Amplitude	20mm
Electrical Requirement	AC220V 50HZ
Power consumption	450W	400W	450W	600W	1400W
Platform Size(mm)	280×220	350×350	370×340	450×450
External Dimension(mm)	500×610×460			590×740×455
Timing Range	1~9999min

 

 

 

 

 

Production workshop

The production of the lautoclave sterillization machine introduce
1.Start by the blanking process for the metal part

Normally the house of the autoclave sterillization machine medical was made by the steel or stainless steel of type as 316
The part was beginning as the blanking
1.Laser blanking machine capacity :8000*2000*10mm 
2.We had about 15 pcs of the laser cutting machine in blanking workshop ,name from No1 to No 15,
3.6S fully carry out in our workshop according to the iso13485,
4.All of the raw material can be Traceability

2.Bending process for CO2 Incubator Shakingmachine by the press break bending machine 

The press brake machine is a powerhouse in the metal fabrication industry, providing an efficient and successful method to bend sheet metal into different forms
To form the metal part into the shape we need ,the first part was by the bending press and the bending die

 

Stainless Steel :Provides great strength and resistance to corrosion, but its greater spring back the ability to revert to its original shape after bending means that it must be handled carefully. 

 

3.Progressive die metal stamping workshop for Autoclave machine part.

High Temperature Autoclave Machine need the bracket for the motor and metal stamping part for the housing and electric connect part,The progressive die stamping can give out the huge volume and low cost for the Surgical Instruments Autoclave Steam Stainless Steel Sterilization Machine Lab Equipment machine spare metal part.

4.Welding workshop for the digital shaker incubator

The Medical Sterilization machine need a lot of welding ,to imporve the capacity and welding quality we introduce the welding robot machine instead of labor human welding
1.QTY of the welding robot :23pcs
2.Capacity of the welding robot :500A
3.Work station:2000*1500mm

5.Plastic injection workshop for the Benchtop Steam Autoclave machine

Plastic part was one part of the  Horizontal Stacked CO2 Incubator Shaker
We had about 10 sets of the plastic injection work for the Lab  Horizontal Stacked CO2 Incubator Shaker
1.The capacity for plastic injection machine was :1000*850*750mm
2.The max ton for plastic injection machine was 1000T

6.The spare part Warehouse for the benchtop Stainless Steel Multifunction Steam Sterilization machine

The 6S was fully carry out in our warehouse with the ERP system 
1.We need to know how many part in our warehouse
2.We need to anticipate the part when to full fill in for all the benchtop Autoclave with Drying Function Water Storage Tank 

7.CNC machining for the benchtop  Horizontal Stacked CO2 Incubator Shaker

The rotor was the key part for the Horizontal Stacked CO2 Incubator Shakert ,to make it perfect especial for the  Horizontal Stacked CO2 Incubator Shaker Equipment ,we need to control the tolerance of the rotor very tight,that was why we introduce the High Temperature Class N Lab  Horizontal Stacked CO2 Incubator ShakerEquipment
1.CNC QTY:15PCS
2.Tolerance for CNC machine :0.01mm

8.co2 incubator stamping ,welding ,rolling Production process on site,the container of the co2 incubator Machine need the vacuum and seal can bear though high pressure 

9.Electric part assemble to the  Multifunction Steam Sterilization Machine workshop,the plc or the other computer control part connect to the machine before move to the next production procss.

10.Test workshop for the  Multifunction Steam Sterilization Machine  

All  Multifunction Steam Sterilization Machine need to be test before transfer it to the warehouse.

Customer visit

Customer review our Laboratory co2 incubator Machine workshop,We were welcome all of our customer to visit our company to review and test the co2 incubator for Organisms, Medical, Chemistry,Our business vision was :long term business ,win-win for the future

Packing and loading

The over sea customer always concern about the packing and loading for the Steam co2 incubator Machine,we cant bear the lost for tiny mistake for the Vacuum Steam Machine machine ,one mistake will cause the machine broken or cant work .
From the packing for Laboratory Medical Sterilization Machine to the container loading detail show as below 

Warehouse and stroage for the medical Medical Sterilization Machine,the temperature should be control within 18-25° for all equipment and test machine ,all the record can trace within 3 years.
 

 

After market service

The maintain and repair guarantee for the Medical Sterilization Machine workshop was the key to the business ,when a customer bought a machine from us ,the guarantee was the most importance things customer concern.we sent out technical service team to oversea customer site for the maintain and repair for our customer .Our service for the lab equipment was not stop after the Vacuum Steam Machine Machine sold ,it was the start for our company and your company for win win situation .You use the Vacuum Steam Machine Machine we take care of the rest.

Exhibition

We take part into the MedtecChina Canton Fair (The China Import and Export Fair) exhibition every year ,hope one day we can meet each on the fair

Our vision

The supplier and the customer was togeher for the future ,both parties should be in win-win situation ,so we were looking forwarder to hold hand by hand for bright future.

1.Integrate incubator and shaker. Save laboratory space.
2.Rational and compact designed, good temperature uniformity, low noisy.
3.Micro-processor controls temperature and shaking speed. Timing function built in.
4.Design of Human-machine interface and operation panel. Cover can be wide-angle opened, convenient to watch and fetch the sample.
5.Built-in cover switch. When the cover is open, air circulation, heating and shaking will automatically stop. No temperature overshoot problem.
6.Unique speed control circuit to ensure shaker smooth starting and avoid liquid spilling.
7.Speed of the circulation fan is adjustable to avoid high-speed of the circulation fan making the sample volatilizing.
8.Independent temperature alarm system. Heating is cut off when temperature over the limited value.
9.Alarm when program completes.
10.Brush-less DC motor, long life and maintenance free. 
Temperature Control Range: R.T.+5~60ºC
Temperature Display Accuracy: 0.1ºC
Temperature Control Accuracy at 37ºC: ≤±0.3ºC
Timing Range: 0~99h59min
Shaking Speed: 50~300rpm
Orbit: 20mm(Circling-round)
Power Supply: AC110V 400W